AS/NZS 1580.602.2:1995 (R2013) Paints and related materials - Methods of test - - Measurement of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees
- Abbreviation
- AS/NZS 1580.602.2:1995 (R2013)
- Valid from
- 4/09/1995
- Information provider
- Standards New Zealand
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard
- Format
- PDF, HARD COPY
Description
This Standard provides procedures for determining the specular gloss of non-metallic paint films using a gloss meter. Identical with and reproduced from ISO 2813:1994.
Scope
This International Standard is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products.
It specifies a test method for determining the specular gloss of paint films using a reflectometer geometry of 20°, 60° or 85°. The method is not suitable for the measurement of the gloss of metallic paints.
- a) The 60° geometry is applicable to all paint films, but for very high gloss and near-matt films 20° or 85° may be more suitable;
- b) The 20° geometry, which uses a smaller receptor aperture, is intended to give improved differentiation between high-gloss paint films (i.e. films with a 60° specular gloss higher than about 70 units);
- c) The 85° geometry is intended to give improved differentiation between low-gloss paint films (i.e. films with a 60° specular gloss lower than about 10 units).
This resource is cited by:
AS/NZS 1580.602.2:1995 (R2013) Paints and related materials - Methods of test - - Measurement of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees
This document is CITED BY:
-
AS 3730.10-2006
AS/NZS 1580.602.2:1995 (R2013) is cited by AS 3730.10-2006 (R2016) Guide to the properties of paints for buildings. Part 10: Latex - Exterior - Gloss
-
AS 3730.6-2006 (R2016)
AS/NZS 1580.602.2:1995 (R2013) is cited by AS 3730.6-2006 (R2016) Guide to the properties of paints for buildings. Part 6: Solvent-borne - Exterior - Full gloss enamel
-
AS 3730.7-2006 (R2016)
AS/NZS 1580.602.2:1995 (R2013) is cited by AS 3730.7-2006 (R2016) Guide to the properties of paints for buildings. Part 7: Latex - Exterior - Flat
-
AS 3730.8-2006 (R2016)
AS/NZS 1580.602.2:1995 (R2013) is cited by AS 3730.8-2006 (R2016) Guide to the properties of paints for buildings. Part 8: Latex - Exterior - Low-gloss
-
AS 3730.9-2006 (R2016)
AS/NZS 1580.602.2:1995 (R2013) is cited by AS 3730.9-2006 (R2016) Guide to the properties of paints for buildings. Part 9: Latex - Exterior - Semi-gloss
-
AS/NZS 2728:2007
AS/NZS 1580.602.2:1995 (R2013) is cited by AS/NZS 2728:2007 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements
-
AS/NZS 2728:2013
AS/NZS 1580.602.2:1995 (R2013) is cited by AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements