AS 1657-2013 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
- Abbreviation
- AS 1657-2013
- Valid from
- 10/12/2013
- Replaces
- AS 1657-1992,
- Information provider
- Intertek Inform
- Author
- Standards Australia
- Information type
- Australian Standard
- Format
- PDF, HARD COPY
Description
This Standard sets out requirements for the design, selection, construction and installation of fixed platforms, walkways, stairways and ladders that are intended to provide safe access to places used by operating, inspection, maintenance and servicing personnel.
Scope
This Standard also applies to the following:
- (a) Movable platforms that are permanently configured but that may be site adjustable or site assembled/modified.
- (b) Permanently installed roof access, where such access is for the purpose of installing, operating, inspecting, maintaining or servicing equipment that is located on, or is accessible from, the roof.
- (c) Permanently installed access for inspection and maintenance of the roof itself.
NOTE: This Standard may also be used for guidance in providing access to some parts of mobile plant, light and telecommunication towers, wind turbine towers and water and sewerage facilities. While such access may not be capable of complying with all the requirements of this Standard, the principles and imposed actions should be followed.
This resource is cited by:
AS 1657-2013 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
This document is CITED BY:
-
D1/AS1 (Amd 6) (Second edition, amendment 6)
AS 1657-2013 is cited by Acceptable Solution D1/AS1: Access Routes from 1/01/2017
-
AS/NZS 3500.1:2015
AS 1657-2013 is cited by AS/NZS 3500.1:2015 Plumbing and drainage - Part 1: Water services
-
AS/NZS 3500.1:2018
AS 1657-2013 is cited by AS/NZS 3500.1:2018 Plumbing and drainage Part 1: Water services
-
AS/NZS 3500.2:2015
AS 1657-2013 is cited by AS/NZS 3500.2:2015 Plumbing and drainage - Part 2: Sanitary plumbing and drainage
-
AS/NZS 3500.2:2018
AS 1657-2013 is cited by AS/NZS 3500.2:2018 Plumbing and drainage Part 2: Sanitary plumbing and drainage
-
AS/NZS 3500.3:2018
AS 1657-2013 is cited by AS/NZS 3500.3:2018 Plumbing and drainage Part 3: Stormwater drainage
This resource cites:
AS 1657-2013 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
This document CITES:
New Zealand Standards
-
AS/NZS 1170.0:2002
AS 1657-2013 cites AS/NZS 1170.0:2002 Structural Design Actions - General principles
-
AS/NZS 1170.1:2002
AS 1657-2013 cites AS/NZS 1170.1:2002 (R2016) Structural Design Actions - Permanent, imposed and other actions
-
AS/NZS 1170.2:2011
AS 1657-2013 cites AS/NZS 1170.2:2011 (R2016) Structural Design Actions - Wind Actions
-
AS/NZS 1170.3:2003 (Reconfirmed in 2016)
AS 1657-2013 cites AS/NZS 1170.3:2003 (R2016) Structural Design Actions - Snow and ice actions
-
AS/NZS 1252:1996
AS 1657-2013 cites AS/NZS 1252:1996 High-strength steel bolts with associated nuts and washers for structural engineering
-
AS/NZS 1554.1:2011
AS 1657-2013 cites AS/NZS 1554.1:2011 Structural steel welding - Part 1: Welding of steel structures
-
AS/NZS 1554.6:2012
AS 1657-2013 cites AS/NZS 1554.6:2012 Structural steel welding - Part 6: Welding stainless steels for structural purposes
-
AS/NZS 1604.3:2012
AS 1657-2013 cites AS/NZS 1604.3:2012 Specification for preservative treatment - Part 3: Plywood
-
AS/NZS 1664.1:1997
AS 1657-2013 cites AS/NZS 1664.1:1997 Aluminium structures - Limit state design
-
AS/NZS 1664.2:1997
AS 1657-2013 cites AS/NZS 1664.2:1997 Aluminium structures - Allowable stress design
-
AS/NZS 1665:2004
AS 1657-2013 cites AS/NZS 1665:2004 (R2016) Welding of aluminium structures
-
AS/NZS 1891.1:2007
AS 1657-2013 cites AS/NZS 1891.1:2007 Industrial fall-arrest systems and devices - Part 1: Harnesses and ancillary equipment
-
AS/NZS 1891.2:2001
AS 1657-2013 cites AS/NZS 1891.2:2001 Industrial fall-arrest systems and devices - Part 2: Horizontal lifeline and rail systems
-
AS/NZS 1891.3:1997
AS 1657-2013 cites AS/NZS 1891.3:1997 Industrial fall-arrest systems and devices - Part 3: Fall-arrest devices
-
AS/NZS 1891.4:2009
AS 1657-2013 cites AS/NZS 1891.4:2009 Industrial fall-arrest systems and devices - Part 4: Selection, use and maintenance
-
AS/NZS 4600:2005
AS 1657-2013 cites AS/NZS 4600:2005 Cold-formed steel structures
-
AS/NZS 4680:2006
AS 1657-2013 cites AS/NZS 4680:2006 (R2017) Hot-dip galvanised (zinc) coatings on fabricated ferrous articles
Australian Standards
-
AS 1111.1-2000
AS 1657-2013 cites AS 1111.1-2000 ISO metric hexagon bolts and screws - Product grade C - Bolts
-
AS 1604.1-2012
AS 1657-2013 cites AS 1604.1-2012 Specification for preservative treatment - Part 1: Sawn and round timber
-
AS 1720.1-2010
AS 1657-2013 cites AS 1720.1-2010 Timber structures Design methods
-
AS 3600-2009
AS 1657-2013 cites AS 3600-2009 Concrete structures
-
AS 3700-2011
AS 1657-2013 cites AS 3700-2011 Masonry structures
-
AS 3990-1993 (R2016)
AS 1657-2013 cites AS 3990-1993 (R2016) Mechanical equipment - Steelwork
-
AS 4100-1998
AS 1657-2013 cites AS 4100-1998 (R2016) Steel structures
Other
-
BS EN 13101:2002
AS 1657-2013 cites BS EN 13101:2002 Steps for underground man entry chambers. Requirements, marking, testing and evaluation of conformity