Save

AS 1397-2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium

Abbreviation
AS 1397-2011
Amendment
A1:2012 - incorporated
Valid from
15/09/2011

Information provider
SAI Global
Author
Standards Australia
Information type
Australian Standard
Format
PDF


Description

This Standard specifies requirements for continuously hot-dip metallic coated sheet steel and strip supplied in thicknesses up to and including 5.0 mm. 

Scope

Requirements for product conformity to this Standard are given in Appendix B.

Requirements covered in this Standard are as follows:

  • Formability grades of steel.
  • Structural grades of steel.
  • Classes of zinc coating, including differential coatings.
  • Classes of zinc coating converted to zinc/iron alloy.
  • Classes of zinc/aluminium coatings.
  • Classes of zinc/aluminium/magnesium alloy coating.
  • Classes of aluminium/zinc alloy coating.
  • Classes of aluminium/zinc/magnesium alloy coating.
  • Surface finish.

Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in Appendix A.

The specified requirements apply to the full length and full width of the product supplied, unless otherwise indicated. Within the description of the classes of coatings, the majority element present is listed first, followed by the next major element and followed by a third element if appropriate.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

AS 1397-2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium

This document is CITED BY:

AS 1397-2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium

Description

This Standard specifies requirements for continuously hot-dip metallic coated sheet steel and strip supplied in thicknesses up to and including 5.0 mm. 

View on Information Provider website
AS 1397-2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
Description

This Standard specifies requirements for continuously hot-dip metallic coated sheet steel and strip supplied in thicknesses up to and including 5.0 mm. 

View on Information Provider website
This resource cites:

AS 1397-2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium

This document CITES:
New Zealand Standards
Australian Standards
Other
Save
Feedback