AS 1357.1-2009 Valves primarily for use in heated water systems - Part 1: Protection valves | Building CodeHub

Resource detail

AS 1357.1-2009 Valves primarily for use in heated water systems - Part 1: Protection valves

View on Information Provider website

Abbreviation: AS 1357.1-2009
Amendment: Amdt 1-2016
Valid from: 28/01/2009

Information provider: Intertek Inform
Author: Standards Australia
Information type: Australian Standard
Format: PDF, HARD COPY

Cited By: This resource is cited by 8 documents (show Citations)
Cites: This resource cites 28 documents (show Citations)

Description

Sets out requirements for the design, construction, testing and performance of temperature/pressure relief valves, expansion control valves, non-return valves, temperature relief valves and combination high-pressure expansion non-return valves, within the range of DN 15 to DN 50.

Scope

This Standard sets out requirements for the following types of valves, within the range of DN 15 to DN 50:

(a) Temperature/pressure-relief valves.
(b) Expansion-control valves.
(c) Non-return valves.
(d) Temperature-relief valves.
(e) Combination high-pressure expansion non-return valves (HPNR).
(f) Leak-protection devices.
The valves specified in this Standard are primarily intended for use in warm and hot water systems that are required to operate at -
(a) continuous operating temperatures not exceeding 85C;
(b) temperatures under emergency conditions, not exceeding 99C; and
(c) continuous working pressure not exceeding 1400 kPa.

NOTE: For valves used with water heaters, which are intended to operate at temperatures above 99C (e.g., hot water boilers), see AS 1271.

For assistance with locating previous versions, please contact the information provider.

View on Information Provider website

For assistance with locating previous versions, please contact the information provider.

This resource is cited by:

AS 1357.1-2009 Valves primarily for use in heated water systems - Part 1: Protection valves

This document is CITED BY:

G12/AS1 (Third Edition, Amendment 10)

AS 1357.1-2009 is cited by Acceptable Solution G12/AS1: Water Supplies from 30/09/2010
G12/AS1 (Third Edition, Amendment 9)

AS 1357.1-2009 is cited by Acceptable Solution G12/AS1: Water Supplies from 30/09/2010
G12/AS1 (Third Edition, Amendment 8)

AS 1357.1-2009 is cited by Acceptable Solution G12/AS1: Water Supplies from 30/09/2010
G12/AS1 (Third Edition, Amendment 7)

AS 1357.1-2009 is cited by Acceptable Solution G12/AS1: Water Supplies from 30/09/2010
G12/AS1 (Third Edition, Amendment 11)

AS 1357.1-2009 is cited by Acceptable Solution G12/AS1: Water Supplies from 30/09/2010
G12/AS1 (Amd 12) (Third Edition, Amendment 12)

AS 1357.1-2009 is cited by Acceptable Solution G12/AS1: Water Supplies from 30/09/2010
AS/NZS 5601.1:2010

AS 1357.1-2009 is cited by AS/NZS 5601.1:2010 Gas installations - Part 1: General installations
AS/NZS 5601.1:2013

AS 1357.1-2009 is cited by AS/NZS 5601.1:2013 Gas installations - General installations

AS 1357.1-2009 Valves primarily for use in heated water systems - Part 1: Protection valves

Description

Sets out requirements for the design, construction, testing and performance of temperature/pressure relief valves, expansion control valves, non-return valves, temperature relief valves and combination high-pressure expansion non-return valves, within the range of DN 15 to DN 50.

View on Information Provider website

AS 1357.1-2009 Valves primarily for use in heated water systems - Part 1: Protection valves

Description

Sets out requirements for the design, construction, testing and performance of temperature/pressure relief valves, expansion control valves, non-return valves, temperature relief valves and combination high-pressure expansion non-return valves, within the range of DN 15 to DN 50.

View on Information Provider website

This resource cites:

AS 1357.1-2009 Valves primarily for use in heated water systems - Part 1: Protection valves

This document CITES:

New Zealand Standards

AS/NZS 1167.1:2005

AS 1357.1-2009 cites AS/NZS 1167.1:2005 Welding and brazing - Filler metals - Filler metal for brazing and braze welding
AS/NZS 1567:1997

AS 1357.1-2009 cites AS/NZS 1567:1997 Copper and copper alloys - Wrought rods, bars and sections
AS/NZS 1568:1998

AS 1357.1-2009 cites AS/NZS 1568:1998 Copper and copper alloys - Forging stock and forgings
AS/NZS 3500.0:2003

AS 1357.1-2009 cites AS/NZS 3500.0:2003 Plumbing and drainage - Glossary of terms
AS/NZS 4020:2005

AS 1357.1-2009 cites AS/NZS 4020:2005 Testing of products for use in contact with drinking water
NZS 3501:1976

AS 1357.1-2009 cites NZS 3501:1976 Specification for copper tubes for water, gas, and sanitation - SPONSORED

Australian Standards

AS 1349-1986

AS 1357.1-2009 cites AS 1349-1986 (R2018) Bourdon tube pressure and vacuum gauges
AS 1432-2004 (R2016)

AS 1357.1-2009 cites AS 1432-2004 (R2016) Copper tubes for plumbing, gasfitting and drainage applications
AS 1565-1996 (Reconfirmed in 2020)

AS 1357.1-2009 cites AS 1565-1996 Copper and copper alloys - Ingots and castings
AS 1572-1998 (Reconfirmed in 2018)

AS 1357.1-2009 cites AS 1572-1998 (R2018) Copper and copper alloys - Seamless tubes for engineering purposes
AS 1722.2-1992 (Reconfirmed in 2017)

AS 1357.1-2009 cites AS 1722.2-1992 (R2017) Pipe threads of Whitworth form - Part 2: Fastening pipe threads
AS 1834.1-1991

AS 1357.1-2009 cites AS 1834.1-1991 (R2018) Material for soldering - Part 1: Solder alloys
AS 2345-2006 (R2016)

AS 1357.1-2009 cites AS 2345-2006 (R2016) Dezincification resistance of copper alloys
AS 2738-2000

AS 1357.1-2009 cites AS 2738-2000 (R2018) Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings
AS 2837-1986

AS 1357.1-2009 cites AS 2837-1986 Wrought alloy steels - Stainless steel bars and semi-finished products
AS 3558.5-1999

AS 1357.1-2009 cites AS 3558.5-1999 (R2016) Methods of testing plastics and composite materials sanitary plumbing fixtures - Method 5: Determination of degradation by ultraviolet light
AS 3688-2005

AS 1357.1-2009 cites AS 3688-2005 Water supply - Metallic fittings and end connectors
AS ISO 7.1-2008

AS 1357.1-2009 cites AS ISO 7.1-2008 (R2017) Pipe threads where pressure-tight joints are made on the threads - Dimensions, tolerances and designation

Other

ASTM A269 - 08

AS 1357.1-2009 cites ASTM A269 - 08 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
ASTM A276 - 08a

AS 1357.1-2009 cites ASTM A276 - 08a Standard Specification for Stainless Steel Bars and Shapes
ASTM A313 / A313M - 08

AS 1357.1-2009 cites ASTM A313 / A313M - 08 Standard Specification for Stainless Steel Spring Wire
ASTM B127 - 05 (2009)

AS 1357.1-2009 cites ASTM B127 - 05 (2009) Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
ASTM B127-05 (2014)

AS 1357.1-2009 cites ASTM B127-05 (2014) Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
ASTM B163-08

AS 1357.1-2009 cites ASTM B163-08 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
ASTM B164-03 (2008)

AS 1357.1-2009 cites ASTM B164-03 (2008) Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
ASTM B165-05 (2009)

AS 1357.1-2009 cites ASTM B165-05 (2009) Standard specification for nickel-copper alloy (UNS N04400) seamless pipe and tube
ISO 228-1:2000

AS 1357.1-2009 cites ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
ISO 6957:1988

AS 1357.1-2009 cites ISO 6957:1988 Copper alloys - Ammonia test for stress corrosion resistance

Feedback