Save

3M All Weather Flashing Tape 8067

Abbreviation
Appraisal number 775
Valid from
20/12/2018

Information provider
BRANZ Limited
Information type
BRANZ Appraisal
Format
PDF

Description

3M All Weather Flashing Tape 8067 is a flexible flashing tape for use around framed joinery openings as a secondary weather resistant barrier. 

The tape is installed into and around the framed joinery opening over the building underlay and exposed frame to cover both the face and edge of the opening framing.  3M All Weather Flashing Tape 8067 is also used at joinery heads to seal flashing upstands to the building underlay.

Scope

3M All Weather Flashing Tape 8067 has been appraised as a flexible flashing tape for use around window and door joinery openings for buildings within the following scope:

  • the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1; and,
  • with a risk score of 0-20, calculated in accordance with NZBC Acceptable Solution E2/AS1, Table 2; and,
  • with wall cladding systems complying with NZBC Acceptable Solution E2/AS1 or a valid BRANZ Appraisal that specifies a flexible flashing tape; and,
  • with flexible building underlays compatible with the flashing tape; and,
  • situated in NZS 3604 Wind Zones up to, and including, Extra High'.

3M All Weather Flashing Tape 8067 has also been appraised as a flexible flashing tape for use around window and door joinery openings for steel framed buildings within the following scope:

  • the scope limitations of NZBC Acceptable Solution E2/AS1, with regards to building height and floor plan area; and,
  • constructed with steel framing complying with the NZBC; and,
  • with a risk score of 0-20, calculated in accordance with NZBC Acceptable Solution E2/AS1, Table 2; and,
  • with wall cladding systems covered by a valid BRANZ Appraisal that specifies a flexible flashing tape; and,
  • with flexible building underlays compatible with the flashing tape and steel frame; and,
  • situated in NZS 3604 Wind Zones up to, and including, Extra High.

(Note: 3M All Weather Flashing Tape 8067 can be used with rigid air barrier systems that don't require a flexible wall underlay, but this aspect has not been addressed by this Appraisal and is outside its scope.)

For assistance with locating previous versions, please contact the information provider.
Notes/comments

This Appraisal replaces BRANZ Appraisal 775 (2012)

View on Information Provider website Download this resource (PDF, 545KB)
For assistance with locating previous versions, please contact the information provider.

This Appraisal replaces BRANZ Appraisal 775 (2012)

This resource is not cited by any other resources.

3M All Weather Flashing Tape 8067

This document is not CITED BY any other resources:

3M All Weather Flashing Tape 8067

Description

3M All Weather Flashing Tape 8067 is a flexible flashing tape for use around framed joinery openings as a secondary weather resistant barrier. 

The tape is installed into and around the framed joinery opening over the building underlay and exposed frame to cover both the face and edge of the opening framing.  3M All Weather Flashing Tape 8067 is also used at joinery heads to seal flashing upstands to the building underlay.

View on Information Provider website Download this resource (PDF, 545KB)
3M All Weather Flashing Tape 8067
Description

3M All Weather Flashing Tape 8067 is a flexible flashing tape for use around framed joinery openings as a secondary weather resistant barrier. 

The tape is installed into and around the framed joinery opening over the building underlay and exposed frame to cover both the face and edge of the opening framing.  3M All Weather Flashing Tape 8067 is also used at joinery heads to seal flashing upstands to the building underlay.

View on Information Provider website Download this resource (PDF, 545KB)
This resource does not cite any other resources.

3M All Weather Flashing Tape 8067

This resource does not CITE any other resources.
Save
Feedback