Save

Jenkin A-Lign® Bevelback Weatherboard Concealed Fix Cavity Solution

Abbreviation
Appraisal number 751
Amendment
3 September 2013
Valid from
20/12/2011

Information provider
BRANZ Limited
Information type
BRANZ Appraisal
Format
PDF

Description

The Jenkin A-lign® Bevelback Weatherboard Concealed Fix Cavity Solution is a cavity-based external wall cladding solution for residential and light commercial type buildings where domestic construction techniques are used.

The solution consists of horizontal concealed fixed Jenkin A-lign® bevelback timber weatherboards, Jenkin A-lign® profiled timber cavity battens, flashings and accessories and is finished with two coats of 100% premium acrylic house paint.

The solution incorporates a primary and secondary means of weather resistance (first and second line of defence) against water penetration by separating the cladding from the external wall frame with a nominal 20 mm drained cavity.

Scope

The Jenkin A-lign® Bevelback Weatherboard Concealed Fix Cavity Solution has been appraised as an external horizontally fixed wall cladding solution for buildings within the following scope:

  • the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1; and,
  • constructed with timber framing complying with the NZBC; and,
  • with a risk score of 0-20, calculated in accordance with NZBC Acceptable Solution E2/AS1, Table 2; and,
  • situated in NZS 3604 Building Wind Zones up to, and including Extra High'.

The Jenkin A-lign® Bevelback Weatherboard Concealed Fix Cavity Solution has also been appraised as an external horizontally fixed wall cladding solution for specifically designed buildings within the following scope:

  • the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1; and,
  • constructed with timber framing complying with the NZBC; and,
  • situated in specific design wind pressures up to a maximum design differential ultimate limit state (ULS) of 2.5 kPa.

The Jenkin A-lign® Bevelback Weatherboard Concealed Fix Cavity Solution is appraised for use with aluminium window and door joinery that is installed with vertical jambs and horizontal heads and sills. (The Appraisal of the Jenkin A-lign Bevelback Weatherboard Concealed Fix Cavity Solution relies on the joinery meeting the requirements of NZS 4211 for the relevant Building Wind Zone or wind pressure.)

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website Download this resource (PDF, 248KB)
For assistance with locating previous versions, please contact the information provider.
This resource is not cited by any other resources.

Jenkin A-Lign® Bevelback Weatherboard Concealed Fix Cavity Solution

This document is not CITED BY any other resources:

Jenkin A-Lign® Bevelback Weatherboard Concealed Fix Cavity Solution

Description

The Jenkin A-lign® Bevelback Weatherboard Concealed Fix Cavity Solution is a cavity-based external wall cladding solution for residential and light commercial type buildings where domestic construction techniques are used.

The solution consists of horizontal concealed fixed Jenkin A-lign® bevelback timber weatherboards, Jenkin A-lign® profiled timber cavity battens, flashings and accessories and is finished with two coats of 100% premium acrylic house paint.

The solution incorporates a primary and secondary means of weather resistance (first and second line of defence) against water penetration by separating the cladding from the external wall frame with a nominal 20 mm drained cavity.

View on Information Provider website Download this resource (PDF, 248KB)
Jenkin A-Lign® Bevelback Weatherboard Concealed Fix Cavity Solution
Description

The Jenkin A-lign® Bevelback Weatherboard Concealed Fix Cavity Solution is a cavity-based external wall cladding solution for residential and light commercial type buildings where domestic construction techniques are used.

The solution consists of horizontal concealed fixed Jenkin A-lign® bevelback timber weatherboards, Jenkin A-lign® profiled timber cavity battens, flashings and accessories and is finished with two coats of 100% premium acrylic house paint.

The solution incorporates a primary and secondary means of weather resistance (first and second line of defence) against water penetration by separating the cladding from the external wall frame with a nominal 20 mm drained cavity.

View on Information Provider website Download this resource (PDF, 248KB)
This resource does not cite any other resources.

Jenkin A-Lign® Bevelback Weatherboard Concealed Fix Cavity Solution

This resource does not CITE any other resources.
Save
Feedback