Palliside® Cellular uPVC Weatherboard Cavity Cladding System

Abbreviation
Appraisal number 491 (2021)
Valid from
7/05/2021

Information provider
BRANZ Limited
Information type
BRANZ Appraisal
Format
PDF

Description

The Palliside® Cavity Cladding System is a cavity-based protective and decorative wall cladding system for residential and light commercial type buildings where domestic construction techniques are used.

The system consists of horizontally fixed, interlocking Palliside® weatherboards (Traditional and Rusticated profiles) installed over timber battens to form the cavity, rigid uPVC flashings and trims, and accessories.

Scope

Timber Framing

The Palliside® Cavity Cladding System has been appraised as an external wall cladding for timber-framed buildings within the following scope:

  • the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1 for timber-framed buildings; and,
  • with a risk score of 0-20, calculated in accordance with NZBC Acceptable Solution E2/AS1, Table 2; and,
  • situated in NZS 3604 Wind Zones up to, and including Extra High.

Steel Framing

The Palliside® Cavity Cladding System has also been appraised as an external wall cladding for steel-framed buildings within the following scope:

  • the scope limitations of NASH Building Envelope Solutions, Paragraph 1.1 for steel-framed buildings; and,
  • with a risk score of 0-20, calculated in accordance with NASH Building Envelope Solutions; and,
  • situated in NASH Standard Part Two Wind Zones up to, and including Extra High.

Specific Design

The Palliside® Cavity Cladding System is also appraised for weathertightness and structural wind loading when used as an external wall cladding system for buildings within the following scope:

  • the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1 for timber-framed buildings or NZBC Acceptable Solution E2/AS4, NASH Building Envelope Solutions Paragraph 1.1 for steel-framed buildings; and,
  • constructed with framing subject to specific engineering design; and,
  • situated in specific design wind pressures up to a maximum design differential ultimate limit state (ULS) of 2.5 kPa.

General

The Palliside® Cavity Cladding System must only be installed vertically on vertical flat surfaces.

The Palliside® Cavity Cladding System is appraised for use with aluminium window and door joinery that is installed with vertical jambs and horizontal heads and sills. (Note: The Appraisal of the Palliside® Cavity Cladding System relies on the joinery meeting the requirements of NZS 4211 for the relevant Wind Zone or design wind pressure.)

For assistance with locating previous versions, please contact the information provider.
Notes/comments

This Appraisal replaces BRANZ Appraisal No. 491 (2015).

View on Information Provider website Download this resource (PDF, 476KB)
For assistance with locating previous versions, please contact the information provider.

This Appraisal replaces BRANZ Appraisal No. 491 (2015).

This resource is not cited by any other resources.

Palliside® Cellular uPVC Weatherboard Cavity Cladding System

This document is not CITED BY any other resources:

Palliside® Cellular uPVC Weatherboard Cavity Cladding System

Description

The Palliside® Cavity Cladding System is a cavity-based protective and decorative wall cladding system for residential and light commercial type buildings where domestic construction techniques are used.

The system consists of horizontally fixed, interlocking Palliside® weatherboards (Traditional and Rusticated profiles) installed over timber battens to form the cavity, rigid uPVC flashings and trims, and accessories.

View on Information Provider website Download this resource (PDF, 476KB)
Palliside® Cellular uPVC Weatherboard Cavity Cladding System
Description

The Palliside® Cavity Cladding System is a cavity-based protective and decorative wall cladding system for residential and light commercial type buildings where domestic construction techniques are used.

The system consists of horizontally fixed, interlocking Palliside® weatherboards (Traditional and Rusticated profiles) installed over timber battens to form the cavity, rigid uPVC flashings and trims, and accessories.

View on Information Provider website Download this resource (PDF, 476KB)
This resource does not cite any other resources.

Palliside® Cellular uPVC Weatherboard Cavity Cladding System

This resource does not CITE any other resources.
Feedback