NZS 4606.1:1989 Storage water heaters - General requirements - SPONSORED | Building CodeHub

Resource detail

NZS 4606.1:1989 Storage water heaters - General requirements - SPONSORED

View on Information Provider website

Abbreviation: NZS 4606.1:1989
Amendment: Amendments 1, 2, 3 - can be downloaded separately
Valid from: 30/12/1989

Information provider: Standards New Zealand
Author: Standards New Zealand
Information type: New Zealand Standard

Cited By: This resource is cited by 19 documents (show Citations)
Cites: This resource cites 15 documents (show Citations)

Description

This Standard specifies general constructional and performance requirements for storage water heaters of 6.5 L to 630 L capacity other than those covered by NZS 4602.

Also specifies the allowable heat loss, the provision of user-adjustable means of temperature control, and routine and type test schedules. Gas-fired water heaters are specified by reference to the AGA/ALPGA Codes.

The Standard is based on Australian Standard AS 1056: Part 1. Cited in the Ministry's Simple House Acceptable Solution.

Scope

This Standard

(a) specifies requirements for electrically heated thermal storage water heaters having capacities within the range 6.5 L to 630 L but excluding low pressure water heaters with copper cylinders within the scope of NZS 4602,
(b) covers gas-fired water heaters by cross-reference to Codes AG 102 and AG 109 published by the Australian Gas Association and the Australian Liquefied Petroleum Gas Association; and
(c) does not apply to heat-exchange water heaters or to fixed water boilers.

For assistance with locating previous versions, please contact the information provider.

Notes/comments

The Building System Performance branch of MBIE has sponsored access to view and print a single downloadable PDF copy of this standard at no charge.

View on Information Provider website

For assistance with locating previous versions, please contact the information provider.

The Building System Performance branch of MBIE has sponsored access to view and print a single downloadable PDF copy of this standard at no charge.

This resource is cited by:

NZS 4606.1:1989 Storage water heaters - General requirements - SPONSORED

This document is CITED BY:

G12/AS1 (Third Edition, Amendment 9)

NZS 4606.1:1989 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
G12/AS1 (Amd 13) (Third Edition, Amendment 13)

NZS 4606.1:1989 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
G12/AS1 (Amd 12) (Third Edition, Amendment 12)

NZS 4606.1:1989 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
G12/AS1 (Third Edition, Amendment 11)

NZS 4606.1:1989 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
G12/AS1 (Third Edition, Amendment 7)

NZS 4606.1:1989 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
G12/AS1 (Third Edition, Amendment 8)

NZS 4606.1:1989 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
G12/AS1 (Third Edition, Amendment 10)

NZS 4606.1:1989 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
H1/AS1 (Fifth edition) (Fifth edition, unamended)

NZS 4606.1:1989 is cited by Acceptable Solution H1/AS1: Energy efficiency for all housing, and buildings up to 300 m². from 29/11/2021
H1/AS1 (Fifth edition, Amd 1) (Fifth edition, Amendment 1)

NZS 4606.1:1989 is cited by Acceptable Solution H1/AS1: Energy efficiency for all housing, and buildings up to 300 m². from 29/11/2021
H1/AS2 (First edition) (First edition, unamended)

NZS 4606.1:1989 is cited by Acceptable Solution H1/AS2: Energy efficiency for buildings greater than 300 m². from 29/11/2021
H1/AS2 (First edition, Amd 1) (First edition, Amendment 1)

NZS 4606.1:1989 is cited by Acceptable Solution H1/AS2: Energy efficiency for buildings greater than 300 m². from 29/11/2021
AS/NZS 3869:1999

NZS 4606.1:1989 is cited by AS/NZS 3869:1999 Domestic solid fuel burning appliances - Design and construction
AS/NZS 4692.2:2005

NZS 4606.1:1989 is cited by AS/NZS 4692.2:2005 (R2016) Electric water heaters - Minimum Energy Performance Standards (MEPS) requirements and energy labelling
NZS 4305:1996

NZS 4606.1:1989 is cited by NZS 4305:1996 Energy efficiency - domestic type hot water systems - SPONSORED
NZS 4606.2:1989

NZS 4606.1:1989 is cited by NZS 4606.2:1989 Storage water heaters - Specific requirements for water heaters with single shells
NZS 4606.3:1992

NZS 4606.1:1989 is cited by NZS 4606.3:1992 Storage water heaters - Specific requirements for water heaters with composite shells
NZS 4607:1989

NZS 4606.1:1989 is cited by NZS 4607:1989 Installation of thermal storage electric water heaters: valve vented systems - SPONSORED
NZS 4608:1992

NZS 4606.1:1989 is cited by NZS 4608:1992 Control valves for hot water systems - SPONSORED
SH/AS1 (First edition, unamended)

NZS 4606.1:1989 is cited by Simple House - Acceptable Solution Revoked

NZS 4606.1:1989 Storage water heaters - General requirements - SPONSORED

Description

This Standard specifies general constructional and performance requirements for storage water heaters of 6.5 L to 630 L capacity other than those covered by NZS 4602.

Also specifies the allowable heat loss, the provision of user-adjustable means of temperature control, and routine and type test schedules. Gas-fired water heaters are specified by reference to the AGA/ALPGA Codes.

The Standard is based on Australian Standard AS 1056: Part 1. Cited in the Ministry's Simple House Acceptable Solution.

View on Information Provider website

NZS 4606.1:1989 Storage water heaters - General requirements - SPONSORED

Description

This Standard specifies general constructional and performance requirements for storage water heaters of 6.5 L to 630 L capacity other than those covered by NZS 4602.

Also specifies the allowable heat loss, the provision of user-adjustable means of temperature control, and routine and type test schedules. Gas-fired water heaters are specified by reference to the AGA/ALPGA Codes.

The Standard is based on Australian Standard AS 1056: Part 1. Cited in the Ministry's Simple House Acceptable Solution.

View on Information Provider website

This resource cites:

NZS 4606.1:1989 Storage water heaters - General requirements - SPONSORED

This document CITES:

New Zealand Standards

NZS 3501:1976

NZS 4606.1:1989 cites NZS 3501:1976 Specification for copper tubes for water, gas, and sanitation - SPONSORED
NZS 4602:1988

NZS 4606.1:1989 cites NZS 4602:1988 Low pressure copper thermal storage electric water heaters - SPONSORED
NZS 4603:1985

NZS 4606.1:1989 cites NZS 4603:1985 Installation of low pressure thermal storage electric water heaters with copper cylinders (open vented systems) - SPONSORED
NZS 4606.2:1989

NZS 4606.1:1989 cites NZS 4606.2:1989 Storage water heaters - Specific requirements for water heaters with single shells
NZS 4606.3:1989

NZS 4606.1:1989 cites NZS 4606.3:1989 Storage water heaters - Part 3: Specific requirements for water heaters with composite shells
NZS 4607:1989

NZS 4606.1:1989 cites NZS 4607:1989 Installation of thermal storage electric water heaters: valve vented systems - SPONSORED
NZS 6200:1988

NZS 4606.1:1989 cites NZS 6200:1988 Specification for general requirements for electrical apparatus and material
NZS 6214:1988

NZS 4606.1:1989 cites NZS 6214:1988 Thermostats and thermal cutouts for domestic thermal storage electric water heaters (alternating current only) - SPONSORED

Australian Standards

AS 1308-1987

NZS 4606.1:1989 cites AS 1308-1987 (R2016) Electric water heaters - Thermostats and thermal cutouts
AS 1939-1990

NZS 4606.1:1989 cites AS 1939-1990 Degrees of protection provided by enclosures for electrical equipment (IP Code)
AS 2345-1980

NZS 4606.1:1989 cites AS 2345-1980 An accelerated laboratory test method for assessment of the susceptibility of brass to dezincification

Other

BS 21:1985

NZS 4606.1:1989 cites BS 21:1985 Specification for pipe threads for tubes and fittings where pressure-tight joints are made on the threads (metric dimensions)
BS 2779:1986

NZS 4606.1:1989 cites BS 2779:1986 Specification for pipe threads for tubes and fittings where pressure-tight joints are not made on the threads (metric dimensions)
BS 2870:1980

NZS 4606.1:1989 cites BS 2870:1980 Specification for rolled copper and copper alloys: sheet, strip and foil
DWSNZ-2005 (Revision 2008)

NZS 4606.1:1989 cites Drinking Water Standards for New Zealand 2005 (R2008)

Feedback