AS/NZS 4600:2005 Cold-formed steel structures

Abbreviation: AS/NZS 4600:2005
Amendment: A1 - incorporated.
Valid from: 29/12/2005
Replaces: AS/NZS 4600:1996,

Information provider: Standards New Zealand,
Author: Standards New Zealand, Standards Australia
Information type: New Zealand Standard,
Format: PDF, HARD COPY,

Cited By: This resource is cited by 21 documents (show Citations)
Cites: This resource cites 33 documents (show Citations)

Description

This Standard sets out minimum requirements for the design of structural members cold-formed to shape from carbon or low-alloy steel sheet, strip, plate or bar not more than 25 mm in thickness and used for load-carrying purposes in buildings.

Scope

This Standard is also applicable for structures other than buildings provided appropriate allowances are made for dynamic effects.

It does not apply to the design of structures subject to fire and brittle fracture.

For assistance with locating previous versions, please contact the information provider.

View on Information Provider website

For assistance with locating previous versions, please contact the information provider.

This resource is cited by:

AS/NZS 4600:2005 Cold-formed steel structures

This document is CITED BY:

B1/VM1 (Amd 12) (First Edition, Amendment 12.)

AS/NZS 4600:2005 is cited by Verification Method B1/VM1: Structure - General from 30/09/2010
B1/VM1 (Amd 17) (First Edition, Amendment 17)

AS/NZS 4600:2005 is cited by Verification Method B1/VM1: Structure - General from 30/09/2010
B1/VM1 (Amd 13) (First edition, Amendment 13)

AS/NZS 4600:2005 is cited by Verification Method B1/VM1: Structure - General from 30/09/2010
B1/VM1 (Amd 10) (First edition, Amendment 10)

AS/NZS 4600:2005 is cited by Verification Method B1/VM1: Structure - General from 30/09/2010
B1/VM1 (Amd 11) (First Edition, Amendment 11)

AS/NZS 4600:2005 is cited by Verification Method B1/VM1: Structure - General from 30/09/2010
B1/VM1 (Amd 15) (First edition, amendment 15)

AS/NZS 4600:2005 is cited by Verification Method B1/VM1: Structure - General from 30/09/2010
B1/VM1 (Amd 14) (First edition, Amendment 14)

AS/NZS 4600:2005 is cited by Verification Method B1/VM1: Structure - General from 30/09/2010
B1/VM1 (Amd 16) (First edition, Amendment 16 )

AS/NZS 4600:2005 is cited by Verification Method B1/VM1: Structure - General from 30/09/2010
B1/VM1 (Amd 21) (First Edition, Amendment 21)

AS/NZS 4600:2005 is cited by Verification Method B1/VM1: Structure - General from 30/09/2010
B1/VM1 (Amd 20) (First edition, Amendment 20)

AS/NZS 4600:2005 is cited by Verification Method B1/VM1: Structure - General from 30/09/2010
B1/VM1 (Amd 19) (First edition, Amendment 19)

AS/NZS 4600:2005 is cited by Verification Method B1/VM1: Structure - General from 30/09/2010
B1/VM1 (Amd 18) (First Edition, Amendment 18)

AS/NZS 4600:2005 is cited by Verification Method B1/VM1: Structure - General from 30/09/2010
AS 1657-2013

AS/NZS 4600:2005 is cited by AS 1657-2013 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS/NZS 2327:2017

AS/NZS 4600:2005 is cited by AS/NZS 2327:2017 Composite structures - Composite steel-concrete construction in buildings
AS/NZS 3678:2016

AS/NZS 4600:2005 is cited by AS/NZS 3678:2016 Structural steel - Hot-rolled plates, floorplates and slabs
AS/NZS 3679.1:2016

AS/NZS 4600:2005 is cited by AS/NZS 3679.1:2016 Structural steel - Part 1: Hot-rolled bars and sections
AS/NZS 3679.2:2016

AS/NZS 4600:2005 is cited by AS/NZS 3679.2:2016 Structural steel - Part 2: Welded I-sections
AS/NZS 5131:2016

AS/NZS 4600:2005 is cited by AS/NZS 5131:2016 Structural steelwork - Fabrication and erection
NASH Standard Part 1:2010

AS/NZS 4600:2005 is cited by NASH Standard - Residential and Low-Rise Steel Framing Part 1 2010 Design Criteria
NASH Standard Part 1:2016

AS/NZS 4600:2005 is cited by NASH Standard Part 1:2016 Design Criteria - Alternative Solution
NZS 4251.1:2007

AS/NZS 4600:2005 is cited by NZS 4251.1:2007 Solid plastering - Cement plaster for walls, ceilings and soffits - SPONSORED

AS/NZS 4600:2005 Cold-formed steel structures

Description

View on Information Provider website

AS/NZS 4600:2005 Cold-formed steel structures

Description

View on Information Provider website

This resource cites:

AS/NZS 4600:2005 Cold-formed steel structures

This document CITES:

AS/NZS 1170.0:2002

AS/NZS 4600:2005 cites AS/NZS 1170.0:2002 Structural Design Actions - General principles

AS/NZS 1252:1996

AS/NZS 4600:2005 cites AS/NZS 1252:1996 High-strength steel bolts with associated nuts and washers for structural engineering

AS/NZS 1554.1:2000

AS/NZS 4600:2005 cites AS/NZS 1554.1:2000 Structural steel welding - Part 1: Welding of steel structures

AS/NZS 1554.2:2003

AS/NZS 4600:2005 cites AS/NZS 1554.2:2003 Structural steel welding - Stud welding (steel studs to steel)

AS/NZS 1554.5:2004

AS/NZS 4600:2005 cites AS/NZS 1554.5:2004 Structural steel welding - Welding of steel structures subject to high levels of fatigue loading

AS/NZS 1554.7:2006

AS/NZS 4600:2005 cites AS/NZS 1554.7:2006 Structural steel welding - Part 7: Welding of sheet steel structures

AS/NZS 1559:1997

AS/NZS 4600:2005 cites AS/NZS 1559:1997 Hot-dip galvanized steel bolts with associated nuts and washers for tower construction

AS/NZS 1594:1997

AS/NZS 4600:2005 cites AS/NZS 1594:1997 Hot-rolled steel flat products

AS/NZS 1595:1998

AS/NZS 4600:2005 cites AS/NZS 1595:1998 (R2016) Cold-rolled, unalloyed, steel sheet and strip

AS/NZS 3678:1996

AS/NZS 4600:2005 cites AS/NZS 3678:1996 Structural steel - Hot-rolled plates, floorplates and slabs

NZS 1170.5:2004 (Excl. A1)

AS/NZS 4600:2005 cites NZS 1170.5:2004 (Excl. A1) Structural Design Actions - Part 5: Earthquake design actions - New Zealand - Sponsored.

NZS 3404 Parts 1 and 2:1997

AS/NZS 4600:2005 cites NZS 3404 Parts 1 and 2:1997 Steel structures standard - SPONSORED

AS 1110.1-2000

AS/NZS 4600:2005 cites AS 1110.1-2000 ISO metric hexagon bolts and screws - Product grades A and B - Part 1: Bolts

AS 1110.2-2000

AS/NZS 4600:2005 cites AS 1110.2-2000 ISO metric hexagon bolts and screws - Product grades A and B - Part 2: Screws

AS 1111.1-2000

AS/NZS 4600:2005 cites AS 1111.1-2000 ISO metric hexagon bolts and screws - Product grade C - Bolts

AS 1111:2-2000

AS/NZS 4600:2005 cites AS 1111.2-2000 ISO metric hexagon bolts and screws - Product grade C - Screws

AS 1112.1-2000

AS/NZS 4600:2005 cites AS 1112.1-2000 ISO metric hexagon nuts - Part 1: Style 1 - Product grades A and B

AS 1112.2-2000

AS/NZS 4600:2005 cites AS 1112.2-2000 ISO metric hexagon nuts - Part 2: Style 2 - Product grades A and B

AS 1112.3-2000

AS/NZS 4600:2005 cites AS 1112.3-2000 ISO metric hexagon nuts

AS 1112.4-2000

AS/NZS 4600:2005 cites AS 1112.4-2000 ISO metric hexagon nuts - Part 4: Chamfered thin nuts - Product grades A and B

AS 1163-1991

AS/NZS 4600:2005 cites AS 1163-1991 Structural steel hollow sections

AS 1170.4-1993

AS/NZS 4600:2005 cites AS 1170.4-1993 Minimum design loads on structures (known as the SAA Loading Code) - Earthquake loads

AS 1275-1985

AS/NZS 4600:2005 cites AS 1275-1985 (R2017) Metric screw threads for fasteners

AS 1391-1991

AS/NZS 4600:2005 cites AS 1391-1991 Metallic materials - Tensile testing at ambient temperature

AS 1397-2001

AS/NZS 4600:2005 cites AS 1397-2001 Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated

AS 1562.1-1992 (R2016)

AS/NZS 4600:2005 cites AS 1562.1-1992 (R2016) Design and installation of sheet roof and wall cladding - Metal

AS 3566.1-2002 (R2015)

AS/NZS 4600:2005 cites AS 3566.1-2002 (R2015) Self-drilling screws for the building and construction industries - Part 1: General requirements and mechanical properties

AS 3566.2-2002

AS/NZS 4600:2005 cites AS 3566.2-2002 Self-drilling screws for the building and construction industries. Part 2: Corrosion resistance requirements

AS 4100-1998

AS/NZS 4600:2005 cites AS 4100-1998 (R2016) Steel structures

AS 4291.1-2000

AS/NZS 4600:2005 cites AS 4291.1-2000 Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs

AWS C1.1M/C1.1:2000

AS/NZS 4600:2005 cites AWS C1.1M/C1.1:2000 (R2006) Recommended Practices For Resistance Welding

AWS C1.3:1970

AS/NZS 4600:2005 cites AWS C1.3:1970 Recommended Practices For Resistance Welding Coated Low Carbon Steels

IFI 114:2003

AS/NZS 4600:2005 cites IFI 114:2003 Break Mandrel Blind Rivets (also referenced as AWS F114)

Feedback