AS/NZS 4401:2006 (R2016) Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)
- Abbreviation
- AS/NZS 4401:2006
- Valid from
- 6/03/2006
- Information provider
- Standards New Zealand
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard
- Format
- PDF, HARD COPY
Description
This Standard specifies the requirements for solid-wall polyethylene (PE) pipes and fittings for soil and waste discharge (low and high temperature) inside buildings, as well as the system itself.
Scope
This Standard does not include buried pipework. It also specifies the test parameters for the test methods referred to in this International Standard.
It is applicable to PE pipes and fittings, as well as assemblies of such pipes and fittings, intended to be used for the following purposes:
- a) soil and waste discharge pipework for the conveyance of domestic waste waters (low and high temperature);
- b) ventilation pipework associated with a);
- c) rainwater pipework inside the building. It is applicable to pipes and fittings designed for jointing by means of elastomeric sealing rings or by butt fusion or electrofusion.
This resource is cited by:
AS/NZS 4401:2006 (R2016) Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)
This document is CITED BY:
-
G13/AS1 (Amd 10) (Second Edition, Amendment 10)
AS/NZS 4401:2006 is cited by Acceptable Solution G13/AS1: Sanitary Plumbing from 30/09/2010
-
G13/AS1 (Amd 9) (Second Edition, Amendment 9)
AS/NZS 4401:2006 is cited by Acceptable Solution G13/AS1: Sanitary Plumbing from 30/09/2010
-
G13/AS1 (Second Edition, Amendment 8)
AS/NZS 4401:2006 is cited by Acceptable Solution G13/AS1: Sanitary Plumbing from 30/09/2010
-
G13/AS1 (Second Edition, Amendment 7)
AS/NZS 4401:2006 is cited by Acceptable Solution G13/AS1: Sanitary Plumbing from 30/09/2010
-
G13/AS1 (Amd 3) (Second Edition, Amendment 3)
AS/NZS 4401:2006 is cited by Acceptable Solution G13/AS1: Sanitary Plumbing from 30/09/2010
-
G13/AS1 (Second Edition, Amendment 4)
AS/NZS 4401:2006 is cited by Acceptable Solution G13/AS1: Sanitary Plumbing from 30/09/2010
-
G13/AS1 (Second Edition, Amendment 5)
AS/NZS 4401:2006 is cited by Acceptable Solution G13/AS1: Sanitary Plumbing from 30/09/2010
-
G13/AS1 (Second Edition, Amendment 6)
AS/NZS 4401:2006 is cited by Acceptable Solution G13/AS1: Sanitary Plumbing from 30/09/2010
-
G14/VM1 (Amd 5) (Second Edition, Amendment 5)
AS/NZS 4401:2006 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 30/09/2010
-
G14/VM1 (Second Edition, Amendment 4)
AS/NZS 4401:2006 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 30/09/2010
-
G14/VM1 (Amd 6) (Second Edition, Amendment 6)
AS/NZS 4401:2006 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 30/09/2010
-
G14/VM1 (Amd 3) (Second Edition, Amendment 3)
AS/NZS 4401:2006 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 30/09/2010
-
AS/NZS 2033:2008
AS/NZS 4401:2006 is cited by AS/NZS 2033:2008 Installation of polyethylene pipe systems
-
AS/NZS 3500.2:2015
AS/NZS 4401:2006 is cited by AS/NZS 3500.2:2015 Plumbing and drainage - Part 2: Sanitary plumbing and drainage
-
AS/NZS 3500.2:2018
AS/NZS 4401:2006 is cited by AS/NZS 3500.2:2018 Plumbing and drainage Part 2: Sanitary plumbing and drainage
-
AS/NZS 3500.3:2018
AS/NZS 4401:2006 is cited by AS/NZS 3500.3:2018 Plumbing and drainage Part 3: Stormwater drainage
-
AS/NZS 3500.3:2021
AS/NZS 4401:2006 is cited by AS/NZS 3500.3:2021 Plumbing and drainage, Part 3: Stormwater drainage
This resource cites:
AS/NZS 4401:2006 (R2016) Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)
This document CITES:
Other
-
BS EN 1053:1996
AS/NZS 4401:2006 cites BS EN 1053:1996 Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test methods for watertightness
-
BS EN 1054:1996
AS/NZS 4401:2006 cites BS EN 1054:1996 Plastics piping systems. Thermoplastics piping systems for soil and waste discharge. Test method for airtightness of joints
-
BS EN 1055:1996
AS/NZS 4401:2006 cites BS EN 1055:1996 Plastics piping systems. Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for resistance to elevated temperature cycling
-
BS EN 681-1:1996
AS/NZS 4401:2006 cites BS EN 681-1:1996 Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
-
ISO 1133:1997
AS/NZS 4401:2006 cites ISO 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
-
ISO 23711:2003
AS/NZS 4401:2006 cites ISO 23711:2003 Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - Thermoplastic elastomers
-
ISO 2505:2005
AS/NZS 4401:2006 cites ISO 2505:2005 Thermoplastics pipes - Longitudinal reversion - Test method and parameters
-
ISO 265-1:1988
AS/NZS 4401:2006 cites ISO 265-1:1988 Pipes and fittings of plastics materials - Fittings for domestic and industrial waste pipes - Basic dimensions: Metric series Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
-
ISO 3126:2005
AS/NZS 4401:2006 cites ISO 3126:2005 Plastics piping systems - Plastics components - Determination of dimensions
-
ISO 580:2005
AS/NZS 4401:2006 cites ISO 580:2005 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating
-
ISO/TR 10837:1991
AS/NZS 4401:2006 cites ISO/TR 10837:1991 Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings