AS/NZS 3518:2013 Acrylonitrile butadiene styrene (ABS) compounds; pipes and fittings for pressure applications
- Abbreviation
- AS/NZS 3518:2013
- Amendment
- A1 - incorporated
- Valid from
- 19/02/2013
- Replaces
- AS/NZS 3518:2004,
- Information provider
- Standards New Zealand,
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard,
- Format
- PDF, HARD COPY,
Description
This Standard specifies the performance requirements for acrylonitrile butadiene styrene (ABS) compounds (ABS 120, ABS 140, ABS 160 and ABS 180), pipes and fittings for the conveyance of liquids under pressure in applications above and below ground.
Scope
The Standard contains dimensions for three ranges of pipe sizes, Series 1, Series 2 and Series 3.
This resource is cited by:
AS/NZS 3518:2013 Acrylonitrile butadiene styrene (ABS) compounds; pipes and fittings for pressure applications
This document is CITED BY:
-
G13/AS2 (Second Edition, Amendment 6)
AS/NZS 3518:2013 is cited by Acceptable Solution G13/AS2: Drainage from 1/01/2017
-
G13/AS2 (Second Edition, Amendment 7)
AS/NZS 3518:2013 is cited by Acceptable Solution G13/AS2: Drainage from 1/01/2017
-
G13/AS2 (Second Edition, Amendment 8)
AS/NZS 3518:2013 is cited by Acceptable Solution G13/AS2: Drainage from 1/01/2017
-
G13/AS2 (Amd 9) (Second Edition, Amendment 9)
AS/NZS 3518:2013 is cited by Acceptable Solution G13/AS2: Drainage from 1/01/2017
-
G13/AS2 (Amd 10) (Second Edition, Amendment 10)
AS/NZS 3518:2013 is cited by Acceptable Solution G13/AS2: Drainage from 1/01/2017
-
G14/VM1 (Amd 6) (Second Edition, Amendment 6)
AS/NZS 3518:2013 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 1/01/2017
-
AS/NZS 3500.1:2015
AS/NZS 3518:2013 is cited by AS/NZS 3500.1:2015 Plumbing and drainage - Part 1: Water services
-
AS/NZS 3500.1:2018
AS/NZS 3518:2013 is cited by AS/NZS 3500.1:2018 Plumbing and drainage Part 1: Water services
-
AS/NZS 4020:2018
AS/NZS 3518:2013 is cited by AS/NZS 4020:2018 Testing of products for use in contact with drinking water
This resource cites:
AS/NZS 3518:2013 Acrylonitrile butadiene styrene (ABS) compounds; pipes and fittings for pressure applications
This document CITES:
AS/NZS 3518:2013 cites AS/NZS 1462.11:1996 (R2017) Methods of test for plastics pipes and fittings - Method 11: Method for high temperature stress-relief testing of fittings
AS/NZS 3518:2013 cites AS/NZS 1462.16:2006 (R2017) Methods of test for plastics pipes and fittings - Method 16: Method for high temperature testing of pipe
AS/NZS 3518:2013 cites AS/NZS 1462.1:2001 Methods of test for plastics pipes and fittings - Method 1: Method for determining the dimensions of pipes and fittings
AS/NZS 3518:2013 cites AS/NZS 1462.28:2003 (R2017) Methods of test for plastics pipes and fittings - Method 28: Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
AS/NZS 3518:2013 cites AS/NZS 1462.29:2006 Methods of test for plastics pipes and fittings - Method 29: Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
AS/NZS 3518:2013 cites AS/NZS 1462.3:1998 (R2017) Methods of test for plastics pipes and fittings - Method 3: Method for determining the impact characteristics of pipes
AS/NZS 3518:2013 cites AS/NZS 1462.4:2002 (R2017) Methods of test for plastics pipes and fittings - Method 4: Method of determining reversion of UPVC pipes
AS/NZS 3518:2013 cites AS/NZS 1462.6:2008 (R2017) Methods of test for plastics pipes and fittings - Method 6: Thermoplastics pipes, fittings and assemblies for the transport of fluids under pressure - Resistance to internal pressure
AS/NZS 3518:2013 cites AS/NZS 1462.8:2008 (R2017) Methods of test for plastics pipes and fittings - Method 8: Method of testing the leaktightness of assemblies
AS/NZS 3518:2013 cites AS/NZS 1477:2006 PVC pipes and fittings for pressure applications
AS/NZS 3518:2013 cites AS/NZS 2280:2012 Ductile iron pipes and fittings
AS/NZS 3518:2013 cites AS/NZS 2544:1995 Grey iron pressure fittings
AS/NZS 3518:2013 cites AS/NZS 2566.2:2002 (R2016) Buried Flexible pipelines - Installation
AS/NZS 3518:2013 cites AS/NZS 3500.0:2003 Plumbing and drainage - Glossary of terms
AS/NZS 3518:2013 cites AS/NZS 3690:2009 Installation of ABS pipe systems
AS/NZS 3518:2013 cites AS/NZS 3879:2006 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings
AS/NZS 3518:2013 cites AS/NZS 4020:2005 Testing of products for use in contact with drinking water
AS/NZS 3518:2013 cites AS/NZS 4087:2011 Metallic flanges for waterworks purposes
AS/NZS 3518:2013 cites AS/NZS 4331.1:1995 (R2016) Metallic flanges - Steel flanges
AS/NZS 3518:2013 cites AS/NZS 4331.2:1995 (R2016) Metallic flanges - Cast iron flanges
AS/NZS 3518:2013 cites AS/NZS 4331.3:1995 (R2016) Metallic flanges - Copper alloy and composite flanges
AS/NZS 3518:2013 cites AS/NZS 4441:2008 Oriented PVC (PVC-O) pipes for pressure applications
AS/NZS 3518:2013 cites AS/NZS 4765:2007 Modified polyvinyl chloride (PVC-M) pipes for pressure applications
AS/NZS 3518:2013 cites SANZ/SAA HB 18.28:1991 Guidelines for third-party certification and accreditation - Guide 28 - General rules for a model third-party certification system for products
AS/NZS 3518:2013 cites AS 1199.1-2003 (R2016) Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
AS/NZS 3518:2013 cites AS 1646-2007 (R2018) Elastomeric seals for waterworks purposes
AS/NZS 3518:2013 cites AS 1722.1-1975 Pipe threads of Whitworth form - Part 1: Sealing pipe threads (metric units)
AS/NZS 3518:2013 cites AS 1722.2-1992 (R2017) Pipe threads of Whitworth form - Part 2: Fastening pipe threads
AS/NZS 3518:2013 cites AS 2129-2000 (R2016) Flanges for pipes valves and fittings
AS/NZS 3518:2013 cites AS 2888.1-2002 (R2017) Methods of testing plastics waste fittings -Method 1: Method of determining the suitability of connection threads of BSP form
AS/NZS 3518:2013 cites HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS/NZS 3518:2013 cites ISO 12162:2009 Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient
AS/NZS 3518:2013 cites ISO 15493:2003 Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric
AS/NZS 3518:2013 cites ISO 161-1:1996 Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Part 1: Metric series
AS/NZS 3518:2013 cites ISO 161-2:1996 Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures Part 2: Inch-based series
AS/NZS 3518:2013 cites ISO 18553:2002 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
AS/NZS 3518:2013 cites ISO 2859-1:1999 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
AS/NZS 3518:2013 cites ISO 3951-1:2005 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
AS/NZS 3518:2013 cites ISO 3951-2:2006 Sampling procedures for inspection by variables Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
AS/NZS 3518:2013 cites ISO 3951-3:2007 Sampling procedures for inspection by variables - Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
AS/NZS 3518:2013 cites ISO 3951-4:2011 Sampling procedures for inspection by variables - Part 4: Procedures for assessment of declared quality levels
AS/NZS 3518:2013 cites ISO 3951-5:2006 Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
AS/NZS 3518:2013 cites ISO 7245:1984 Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) - General specification for moulding and extrusion materials
AS/NZS 3518:2013 cites ISO 727-1:2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 1: Metric series
AS/NZS 3518:2013 cites ISO 727-2:2005 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 2: Inch-based series