AS/NZS 2642.3:2008 Polybutylene pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications
- Abbreviation
- AS/NZS 2642.3:2008
- Amendment
- A1 - incorporated.
- Valid from
- 18/03/2008
- Replaces
- AS/NZS 2642.3:1994
- Information provider
- Standards New Zealand
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard
- Format
- PDF, HARD COPY
Description
This Standard provides manufacturers and purchasers with a standard specification for mechanical jointing fittings suitable for use as fixed joints with polybutylene plumbing pipes manufactured in accordance with AS/NZS 2642.2.
Scope
This Standard specifies requirements for mechanical jointing fittings suitable for use as fixed joints with polybutylene plumbing pipes manufactured in accordance with AS/NZS 2642.2.
This resource is cited by:
AS/NZS 2642.3:2008 Polybutylene pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications
This document is CITED BY:
-
G12/AS1 (Amd 13) (Third Edition, Amendment 13)
AS/NZS 2642.3:2008 is cited by Acceptable Solution G12/AS1: Water Supplies from 10/10/2011
-
G12/AS1 (Third Edition, Amendment 9)
AS/NZS 2642.3:2008 is cited by Acceptable Solution G12/AS1: Water Supplies from 10/10/2011
-
G12/AS1 (Third Edition, Amendment 8)
AS/NZS 2642.3:2008 is cited by Acceptable Solution G12/AS1: Water Supplies from 10/10/2011
-
G12/AS1 (Third Edition, Amendment 10)
AS/NZS 2642.3:2008 is cited by Acceptable Solution G12/AS1: Water Supplies from 10/10/2011
-
G12/AS1 (Amd 12) (Third Edition, Amendment 12)
AS/NZS 2642.3:2008 is cited by Acceptable Solution G12/AS1: Water Supplies from 10/10/2011
-
G12/AS1 (Third Edition, Amendment 11)
AS/NZS 2642.3:2008 is cited by Acceptable Solution G12/AS1: Water Supplies from 10/10/2011
-
G14/VM1 (Amd 5) (Second Edition, Amendment 5)
AS/NZS 2642.3:2008 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 10/10/2011
-
G14/VM1 (Second Edition, Amendment 4)
AS/NZS 2642.3:2008 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 10/10/2011
-
G14/VM1 (Amd 6) (Second Edition, Amendment 6)
AS/NZS 2642.3:2008 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 10/10/2011
-
AS/NZS 3500.1:2015
AS/NZS 2642.3:2008 is cited by AS/NZS 3500.1:2015 Plumbing and drainage - Part 1: Water services
-
AS/NZS 3500.1:2018
AS/NZS 2642.3:2008 is cited by AS/NZS 3500.1:2018 Plumbing and drainage Part 1: Water services
-
AS/NZS 3500.4:2015
AS/NZS 2642.3:2008 is cited by AS/NZS 3500.4:2015 Plumbing and drainage - Heated water services
-
AS/NZS 3500.4:2018
AS/NZS 2642.3:2008 is cited by AS/NZS 3500.4:2018 Plumbing and drainage Part 4: Heated water services
-
AS/NZS 4020:2018
AS/NZS 2642.3:2008 is cited by AS/NZS 4020:2018 Testing of products for use in contact with drinking water
-
NZS 4515:2009
AS/NZS 2642.3:2008 is cited by NZS 4515:2009 Fire sprinkler systems for life safety in sleeping occupancies (up to 2000 square metres) - SPONSORED
-
NZS 4541:2013
AS/NZS 2642.3:2008 is cited by NZS 4541:2013 Automatic fire sprinkler systems
-
NZS 4541:2020
AS/NZS 2642.3:2008 is cited by NZS 4541:2020 Automatic fire sprinkler systems
This resource cites:
AS/NZS 2642.3:2008 Polybutylene pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications
This document CITES:
New Zealand Standards
-
AS/NZS 1462.6:2008
AS/NZS 2642.3:2008 cites AS/NZS 1462.6:2008 (R2017) Methods of test for plastics pipes and fittings - Method 6: Thermoplastics pipes, fittings and assemblies for the transport of fluids under pressure - Resistance to internal pressure
-
AS/NZS 2642.1:2007
AS/NZS 2642.3:2008 cites AS/NZS 2642.1:2007 Polybutylene pipe systems - Polybutylene (PB) pipe extrusion compounds
-
AS/NZS 2642.2:2008
AS/NZS 2642.3:2008 cites AS/NZS 2642.2:2008 Polybutylene pipe systems - Polybutylene (PB) pipe for hot and cold water applications
-
AS/NZS 3500.0:2003
AS/NZS 2642.3:2008 cites AS/NZS 3500.0:2003 Plumbing and drainage - Glossary of terms
-
AS/NZS 3707:2001
AS/NZS 2642.3:2008 cites AS/NZS 3707:2001 (R2017) Method for testing pressure cycling resistance of pipes and fittings
-
AS/NZS 4020:2005
AS/NZS 2642.3:2008 cites AS/NZS 4020:2005 Testing of products for use in contact with drinking water
-
AS/NZS 4131:2003
AS/NZS 2642.3:2008 cites AS/NZS 4131:2003 Polyethylene (PE) compounds for pressure pipes and fittings
-
SANZ/SAA HB 18.28:1991
AS/NZS 2642.3:2008 cites SANZ/SAA HB 18.28:1991 Guidelines for third-party certification and accreditation - Guide 28 - General rules for a model third-party certification system for products
Australian Standards
-
AS 1199.1-2003 (R2016)
AS/NZS 2642.3:2008 cites AS 1199.1-2003 (R2016) Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
-
AS 1349-1986
AS/NZS 2642.3:2008 cites AS 1349-1986 (R2018) Bourdon tube pressure and vacuum gauges
-
AS 2345-2006 (R2016)
AS/NZS 2642.3:2008 cites AS 2345-2006 (R2016) Dezincification resistance of copper alloys
-
AS 3688-2005
AS/NZS 2642.3:2008 cites AS 3688-2005 Water supply - Metallic fittings and end connectors
Other
-
HB 18.28-2005
AS/NZS 2642.3:2008 cites HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products