AS/NZS 1254:2010 PVC-U pipes and fittings for stormwater and surface water applications | Building CodeHub

Resource detail

AS/NZS 1254:2010 PVC-U pipes and fittings for stormwater and surface water applications

View on Information Provider website

Abbreviation: AS/NZS 1254:2010
Amendment: A1, A2 and A3 - incorporated
Valid from: 5/04/2010

Information provider: Standards New Zealand
Author: Standards New Zealand, Standards Australia
Information type: New Zealand Standard
Format: PDF, HARD COPY

Cited By: This resource is cited by 7 documents (show Citations)
Cites: This resource cites 20 documents (show Citations)

Description

This Standard outlines minimum requirements for the manufacture and performance of PVC-U pipes and fittings for stormwater applications for use by manufacturers, specifiers and purchasers of such products.

Scope

This Standard specifies requirements for PVC-U pipes and fittings for conveyance of stormwater or surface water. The Standard includes requirements for both plain and structured wall pipes and fittings. Alternative methods for determining compliance with this Standard are given in Appendix A. Appendix B sets out additional requirements for pipes and fittings classed as best environmental practice PVC for stormwater and surface water applications.

For assistance with locating previous versions, please contact the information provider.

View on Information Provider website

For assistance with locating previous versions, please contact the information provider.

This resource is cited by:

AS/NZS 1254:2010 PVC-U pipes and fittings for stormwater and surface water applications

This document is CITED BY:

E1/AS1 (Amd 10) (First Edition, Amendment 10)

AS/NZS 1254:2010 is cited by Acceptable Solution E1/AS1: Surface Water from 14/02/2014
E1/AS1 (Amd 9) (First Edition, Amendment 9)

AS/NZS 1254:2010 is cited by Acceptable Solution E1/AS1: Surface Water from 14/02/2014
E1/AS1 (Amd 11) (First Edition, Amendment 11.)

AS/NZS 1254:2010 is cited by Acceptable Solution E1/AS1: Surface Water from 14/02/2014
E1/AS1 (Amd 12) (First Edition, Amendment 12.)

AS/NZS 1254:2010 is cited by Acceptable Solution E1/AS1: Surface Water from 14/02/2014
AS/NZS 3500.3:2018

AS/NZS 1254:2010 is cited by AS/NZS 3500.3:2018 Plumbing and drainage Part 3: Stormwater drainage
AS/NZS 3500.3:2021

AS/NZS 1254:2010 is cited by AS/NZS 3500.3:2021 Plumbing and drainage, Part 3: Stormwater drainage
AS/NZS 3879:2011

AS/NZS 1254:2010 is cited by AS/NZS 3879:2011 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings

AS/NZS 1254:2010 PVC-U pipes and fittings for stormwater and surface water applications

Description

This Standard outlines minimum requirements for the manufacture and performance of PVC-U pipes and fittings for stormwater applications for use by manufacturers, specifiers and purchasers of such products.

View on Information Provider website

AS/NZS 1254:2010 PVC-U pipes and fittings for stormwater and surface water applications

Description

This Standard outlines minimum requirements for the manufacture and performance of PVC-U pipes and fittings for stormwater applications for use by manufacturers, specifiers and purchasers of such products.

View on Information Provider website

This resource cites:

AS/NZS 1254:2010 PVC-U pipes and fittings for stormwater and surface water applications

This document CITES:

New Zealand Standards

AS/NZS 1260:2009

AS/NZS 1254:2010 cites AS/NZS 1260:2009 PVC-U Pipes and fittings for drain, waste and vent applications
AS/NZS 1462.11:1996

AS/NZS 1254:2010 cites AS/NZS 1462.11:1996 (R2017) Methods of test for plastics pipes and fittings - Method 11: Method for high temperature stress-relief testing of fittings
AS/NZS 1462.15:1996

AS/NZS 1254:2010 cites AS/NZS 1462.15:1996 (R2017) Methods of test for plastics pipes and fittings - Method 15: Method for determination of vinyl chloride monomer content
AS/NZS 1462.1:2006

AS/NZS 1254:2010 cites AS/NZS 1462.1:2006 Methods of test for plastics pipes and fittings - Method 1: Method for determining the dimensions of pipes and fittings
AS/NZS 1462.21:1997

AS/NZS 1254:2010 cites AS/NZS 1462.21:1997 (R2017) Methods of test for plastics pipes and fittings - Method 21: Method for determination of bond strength
AS/NZS 1462.22:1997

AS/NZS 1254:2010 cites AS/NZS 1462.22:1997 Methods of test for plastics pipes and fittings - Method 22: Method for determination of pipe stiffness
AS/NZS 1462.23:2006

AS/NZS 1254:2010 cites AS/NZS 1462.23:2006 Methods of test for plastics pipes and fittings - Method 23: Method for determination of ring flexibility
AS/NZS 1462.3:1998

AS/NZS 1254:2010 cites AS/NZS 1462.3:1998 (R2017) Methods of test for plastics pipes and fittings - Method 3: Method for determining the impact characteristics of pipes
AS/NZS 1462.8:2008

AS/NZS 1254:2010 cites AS/NZS 1462.8:2008 (R2017) Methods of test for plastics pipes and fittings - Method 8: Method of testing the leaktightness of assemblies
AS/NZS 1477:2006

AS/NZS 1254:2010 cites AS/NZS 1477:2006 PVC pipes and fittings for pressure applications
AS/NZS 2032:2006

AS/NZS 1254:2010 cites AS/NZS 2032:2006 Installation of PVC pipe systems
AS/NZS 3500.0:2003

AS/NZS 1254:2010 cites AS/NZS 3500.0:2003 Plumbing and drainage - Glossary of terms
AS/NZS 3879:2006

AS/NZS 1254:2010 cites AS/NZS 3879:2006 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings
AS/NZS 4765:2007

AS/NZS 1254:2010 cites AS/NZS 4765:2007 Modified polyvinyl chloride (PVC-M) pipes for pressure applications

Australian Standards

AS 1646-2007

AS/NZS 1254:2010 cites AS 1646-2007 (R2018) Elastomeric seals for waterworks purposes
AS 681.1-2008

AS/NZS 1254:2010 cites AS 681.1-2008 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
AS 681.2-2008

AS/NZS 1254:2010 cites AS 681.2-2008 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers

Other

ISO 13967:2009

AS/NZS 1254:2010 cites ISO 13967:2009 Thermoplastics fittings - Determination of ring stiffness
ISO/IEC 17050-1:2004

AS/NZS 1254:2010 cites ISO/IEC 17050-1:2004 Conformity assessment - Supplier's declaration of conformity - Part 1: General requirements
ISO/IEC 17050-2:2004

AS/NZS 1254:2010 cites ISO/IEC 17050-2:2004 Preview Conformity assessment -- Supplier's declaration of conformity -- Part 2: Supporting documentation

Feedback