NZSIP Smart Panel Building System

Abbreviation
Appraisal number 1203 (2021)
Amendment
8/11/2022
Valid from
21/12/2021

Information provider
BRANZ Limited
Information type
BRANZ Appraisal
Format
PDF

Description

NZSIP Smart Panel Building System is a house building system based on structural insulated panels (SIPs) which are used for walls and roofs. The design and construction of the remainder of the building structure, comprising foundation, ground and upper floor, interior walls and roof framing, are conventional. Wall and roof cladding are conventional and fixed to timber battens or purlins attached to the panels. Joinery and internal finishing are also conventional.

NZSIP Smart Panels are manufactured of Strandboard® facings with a factory foamed polyurethane insulation (PUR) core. The panels are 115, 165 or 215 mm thick, nominally 1,205 mm wide, with standard lengths up to 3.6 m. Panels can also be manufactured to varying lengths and widths depending on their design location.

Scope

1. The NZSIP Smart Panel Building System has been appraised for use in single or multi-unit Risk Group SH housing, which meets the scope of Clause 1.1.2 of NZS 3604 with the following limitations:

  • the building must be within the scope of New Zealand Building Code (NZBC) Acceptable Solution C/AS1; and
  • the building must be single or two-storeys, with a height restriction of up to 10 m; and,
  • the building is 1 m or more from the relevant boundary; and,
  • the ground floor construction platform must comprise a concrete slab-on-ground constructed in accordance with NZS 3604, or a suspended timber-framed floor constructed in accordance with NZS 3604; and,
  • the first (upper) floor is a suspended timber floor constructed in accordance with NZS 3604; and,
  • the first floor live load does not exceed 1.5 kPa; and,
  • where roof framing construction comprises of trusses or rafters which meet the provisions of NZS 3604; and/or,
  • where the roof is constructed using NZSIP Smart Panels supported on beams, these must be subject to specific engineering design (SED); and,
  • with a roof pitch between 3° and 30˚; and,
  • roof and wall claddings must comply with NZBC Acceptable Solution E2/AS1 or be BRANZ Appraised.

2. This Appraisal covers the assembly of the external walls and roof using the NZSIP Smart Panel Building System with the following connections:

  • Wall panel to concrete slab foundation or light timber frame ground floor, bottom plate fixing.
  • Wall panel to first floor panel bottom and top plate fixing.
  • Roof panel to wall and supporting structures.
  • Wall batten and roof purlin attachment.

3. The use of NZSIP Smart Panel Building System wall and ceiling panels in the following situations have not been assessed and are outside the scope of this Appraisal.

  • Sauna rooms and the like, where they may be exposed to sustained high humidity (greater than 85% relative humidity (RH)) or liquid water.
  • Where temperatures are in excess of 35ºC over large areas for prolonged periods (e.g. ceiling heating installations) or in excess of 50ºC in localised areas (e.g. the area adjacent to a fuel burning appliance), refer to Paragraph 11.1.
For assistance with locating previous versions, please contact the information provider.
Notes/comments

This Appraisal was amended to extend the scope from detached housing to attached housing.

View on Information Provider website Download this resource (PDF, 354KB)
For assistance with locating previous versions, please contact the information provider.

This Appraisal was amended to extend the scope from detached housing to attached housing.

This resource is not cited by any other resources.

NZSIP Smart Panel Building System

This document is not CITED BY any other resources:

NZSIP Smart Panel Building System

Description

NZSIP Smart Panel Building System is a house building system based on structural insulated panels (SIPs) which are used for walls and roofs. The design and construction of the remainder of the building structure, comprising foundation, ground and upper floor, interior walls and roof framing, are conventional. Wall and roof cladding are conventional and fixed to timber battens or purlins attached to the panels. Joinery and internal finishing are also conventional.

NZSIP Smart Panels are manufactured of Strandboard® facings with a factory foamed polyurethane insulation (PUR) core. The panels are 115, 165 or 215 mm thick, nominally 1,205 mm wide, with standard lengths up to 3.6 m. Panels can also be manufactured to varying lengths and widths depending on their design location.

View on Information Provider website Download this resource (PDF, 354KB)
NZSIP Smart Panel Building System
Description

NZSIP Smart Panel Building System is a house building system based on structural insulated panels (SIPs) which are used for walls and roofs. The design and construction of the remainder of the building structure, comprising foundation, ground and upper floor, interior walls and roof framing, are conventional. Wall and roof cladding are conventional and fixed to timber battens or purlins attached to the panels. Joinery and internal finishing are also conventional.

NZSIP Smart Panels are manufactured of Strandboard® facings with a factory foamed polyurethane insulation (PUR) core. The panels are 115, 165 or 215 mm thick, nominally 1,205 mm wide, with standard lengths up to 3.6 m. Panels can also be manufactured to varying lengths and widths depending on their design location.

View on Information Provider website Download this resource (PDF, 354KB)
This resource does not cite any other resources.

NZSIP Smart Panel Building System

This resource does not CITE any other resources.
Feedback